Analisis Pengendalian Mutu Produk Rendang Domba di CV. Mitra Tani Farm Menggunakan Checksheet, Diagram Pareto, dan Diagram Fishbone

Authors

  • Kharimatussalma Kharimatussalma Institut Pertanian Bogor
  • Rachelin Chelsea Januar Institut Pertanian Bogor
  • Nanda Cahyani Tunang Institut Pertanian Bogor
  • Manik Liraqyeti Institut Pertanian Bogor
  • Rafiq Hariri Institut Pertanian Bogor
  • Naila Lupita Tambunan Institut Pertanian Bogor
  • Muhamad Dava Alfarezi Institut Pertanian Bogor

DOI:

https://doi.org/10.61132/jumaket.v2i4.1071

Keywords:

Checksheet, Fishbone diagram, Lamb rendang, Pareto diagram, Quality control

Abstract

This study analyzes the quality control of lamb rendang products at CV. Mitra Tani Farm using three Statistical Quality Control (SQC) tools: the checksheet, Pareto diagram, and Fishbone diagram. The research was conducted to identify major product defects and their root causes in the canned lamb rendang production process. A descriptive quantitative method was applied through direct observation, interviews, and documentation. Data were collected using a checksheet to record defect types and frequencies, then analyzed with Pareto and Fishbone diagrams to determine dominant issues and underlying factors. The results showed that labeling errors were the most frequent defect, followed by inaccurate sterilization and machine overload. These problems were mainly caused by limited operator skills, non-standardized procedures, and inadequate machine performance. The findings indicate that improving operator training, refining standard procedures, and maintaining equipment are essential to enhance product quality and consistency.

 

Downloads

Download data is not yet available.

References

Alanasry, H. S., Safitri, L., Azizah, N., Cahyadi, Y., Imelda, P., & Apriliani, F. (2025). Pengendalian kualitas dengan pendekatan input–proses–output produk sayur hidroponik kangkung pada BSI Farm. Jurnal Bisnis, Ekonomi Syariah, dan Pajak, 2(2), 60–73. https://doi.org/10.61132/jbep.v2i2.1037

Anggraeni, R., & Izza, N. A. (2022). Penerapan statistical quality control dalam pengendalian mutu produksi snack eggroll. Jurnal Kewirausahaan dan Inovasi, 1(1), 87–96. https://doi.org/10.21776/jki.2022.01.1.10

Dartawan, I. K., & Setiafindari, W. (2023). Analisis pengendalian kualitas produk dengan metode seven tools dan Kaizen pada PT Sinar Semesta. Jurnal ARTI: Aplikasi Rancangan Teknik Industri, 18(2), 29–38.

Goetsch, D. L., & Davis, S. B. (2016). Quality management for organizational excellence: Introduction to total quality (8th ed.). Pearson Education.

Heizer, J., Render, B., & Munson, C. (2020). Operations management: Sustainability and supply chain management (13th ed.). Pearson Education.

Inayah, S. K., Wahyudin, W., & Herwanto, D. (2023). Analisis kualitas produk toolbox menggunakan metode seven tools di PT KSKB. Jurnal Asiimetrik: Jurnal Ilmiah Rekayasa dan Inovasi, 5(2), 263–272. https://doi.org/10.35814/asiimetrik.v5i2.4877

Ishikawa, K. (1986). Guide to quality control. Asian Productivity Organization.

Montgomery, D. C. (2019). Introduction to statistical quality control (8th ed.). John Wiley & Sons.

Nabila, S. (2021). Penyusunan rencana hazard analysis critical control point (HACCP) untuk produk rendang domba kaleng di CV Mitra Tani Farm, Kabupaten Bogor (Skripsi). Universitas Brawijaya.

Nursyamsi, I., & Momon, A. (2022). Analisis pengendalian kualitas menggunakan metode seven tools untuk meminimalkan return konsumen di PT XYZ. Jurnal Serambi Engineering, 7(1), 2701–2708.

Oakland, J. S. (2014). Total quality management and operational excellence: Text with cases (4th ed.). Routledge.

Pebrianti, S. A., Kusumah, S. H., & Yunita, N. (2021). Identifikasi permasalahan kualitas garam industri di PT Niaga Garam Cemerlang menggunakan check sheet, Pareto chart, dan fishbone analysis. Jurnal Fakultas Teknik Kuningan, 2(3), 79–86. https://jurnal.unisa.ac.id/index.php/jft/article/view/129

Sidah, N., Nuruddin, M., & Andesta, D. (2022). Pengendalian kualitas produk dengan metode statistical quality control (SQC) untuk mengurangi produk gagal pada Sri Bakery. Jati Emas (Jurnal Aplikasi Teknik dan Pengabdian Masyarakat), 6(2), 1–8.

Tuahatu, E. C., Tutuhatunewa, A., & Tupan, J. M. (2022). Analisis pengendalian kualitas pengiriman barang melalui penerapan metode statistical quality control pada PT Pos Indonesia Cabang Ambon. I Tabaos, 2(1), 12–22. https://doi.org/10.30598/i-tabaos.2022.2.1.12-22

Zhao, X., & Lertlit, S. (2025). Assessing the input–process–output model for quality management in ASEAN universities: Perspectives of Chinese students abroad. Jurnal Ilmiah Ilmu Terapan Universitas Jambi, 9(2), 810–822. https://doi.org/10.22437/jiituj.v9i2.41668

Downloads

Published

2025-12-15

How to Cite

Kharimatussalma Kharimatussalma, Rachelin Chelsea Januar, Nanda Cahyani Tunang, Manik Liraqyeti, Rafiq Hariri, Naila Lupita Tambunan, & Muhamad Dava Alfarezi. (2025). Analisis Pengendalian Mutu Produk Rendang Domba di CV. Mitra Tani Farm Menggunakan Checksheet, Diagram Pareto, dan Diagram Fishbone. Jurnal Manajemen Kewirausahaan Dan Teknologi, 2(4), 158–169. https://doi.org/10.61132/jumaket.v2i4.1071

Issue

Vol. 2 No. 4 (2025): Desember: Jurnal Manajemen Kewirausahaan dan Teknologi

Section

Articles

License

Copyright (c) 2025 Jurnal Manajemen Kewirausahaan dan Teknologi

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.